You have no items in your shopping cart.
Terma Sim Single Heating Element - For Electric Heated Towel Rail Radiator
- Available as 150W, 200W, 300W, 400W, 600W, 800W and 1000W
- Manufactures to EU and British Standards
- 1 fixed heat setting of 65 C regulating the internal radiator temp.
- Power supply controlled from switched fused spur
- No power button on the element itself
- IP65 Ip Rating
- 1.5mt Flex Cable Attached
SIM is a class I heating element.
Functionality The SIM is a basic, simple heating element. The SIM has built-in protection against overheating and is fitted with a bimetal temperature limiter. The device is available in a wide range of power outputs up to 1500 W.
Intelligent Building Systems The SIM is suitable for connection to external timers and intelligent building systems.
Safety The SIM has an exceptionally high degree of moisture ingress protection and is fitted with a thermal fuse to prevent overheating of the radiator.
Design The SIM has a stainless steel housing. It does not have an on/off switch on its housing so it must be controlled externally either by a timer or switched fused spur. A version with a switch located on the plug is available.
Colour Available colour: stainless steel.
No you don't. Towel Rail is Pre-Filled and comes with choice of element.
What parts I need for Central Heating Connection?
What Is BTU ?
BTU stands for British Thermal Unit, it is energy (heat ) measurement unit. We also provide heat output of the towel rails in WATT.
We recommend you to calculate your room BTU requirement and select your radiator according to your room requirement. We have designed a BTU calculator tool.
Can I Use My Towel Rail As Dual Fuel ( Central Heating + Electric )?
Sure you can. This towel rail and other LADDER TYPE TOWEL RAILS can be used as Dual Fuel. You need additional parts like HEATING ELEMENT + T-PIECE or DUAL FUEL CORNER VALVE. If you need any assistance please do not hesitate to contact us for friendly advise.
Do You Have Fitting Instructions?
We don't include a fitting instructions for our Ladder Type Towel Rail But You Can Download A Copy From This Link
Wats Is Max Operating Pressure?
Our Towel Rails Goes Through Several Quality Checks. One Of the Check Is 10bar Pressure Test. Normal Central Heating Systems normally Operates 1.5-2.5Bar. We recommend using your towel rail on max 5bar pressure.
What Is Pipe Centers?
Pipe Centers are very important if you are replacing your existing radiator or towel rail with new one. If you do not wish to amend your pipes, we recommend you to choose measure your existing pipe centre and choose a replacement heated towel rail same or closest possible pipe centre. Please contact us if you are not sure and we will be more than happy to assist you to find your replacement towel rail.
Towel Rails Heat Less Than Normal Panel Radiators?
Towel Rails heat just like normal panel radiators. Heat output of the radiators are limited to surface area of the radiators. Panel Radiators usually has more surface area compared to heated towel rails.This is because of the built heat fins or large body of the radiators. However, towels on towel rails will reduce the heat output of the towel rails into the room.
How to Clean CHROME Towel Rails?
We Recommend Wet/Damp Cloth and dry microfibre cloth to dry and polish. For Stubborn marks, we recommend 1 part distilled vinegar + 1 part warm water mixture. I Recommend you to avoid any abrasive cloths and chemical cleaners such as oven or bathroom cleaners. Chemical cleaners may leave a mark or corrode your chrome plating on towel rail.