A perfect replacement for a 800mm wide traditional radiator. No need to a adjust the plumbing. I could have even left the valves the same but used the ones that came with the rad as the looked so nice. I did also purchase and elbow to enable the drop in. Looks great. Warms up very quickly and retains the heat for some time.
In case anyone should find it useful, when attaching the brackets to the wall make sure the tiny pilot hole for the grub screw is facing outwards, and also position the brackets towards the outside of the rad to make it easier to get a screwdriver between the rad and the wall.
C
Customer
A perfect replacement for a 800mm wide traditional radiator. No need to a adjust the plumbing. I could have even left the valves the same but used the ones that came with the rad as the looked so nice. I did also purchase and elbow to enable the drop in. Looks great. Warms up very quickly and retains the heat for some time.
In case anyone should find it useful, when attaching the brackets to the wall make sure the tiny pilot hole for the grub screw is facing outwards, and also position the brackets towards the outside of the rad to make it easier to get a screwdriver between the rad and the wall.
We offer our electric towel radiator range pre-filled with choice of element.
Element doesn't come installed on the towel rail, this is for avoiding any transit damage. You can install the element into the left or right hand side at the bottom.
We fill our electric towel rail radiators with minimum 85% Filtered RO Water (Reverse Osmosis) and inhibitor ( Ethylene Glycol ) mixture. We leave air gap for expansion and must bleed on the first heat after installation.
Sure you can. Our towel rails has a standard 1/2" BSP thread.
No, as heat rises, element must be installed at the bottom of the towel rail. Element must be immersed into the filling medium.
If you will need any further information regarding our Pre-Filled electric towel rail radiators please contact us via Elegant-Radiators contact page or online chat at the bottom right corner of this page.
You need a pair of valves for central heating connection. You need STRAIGHT INLINE valves for pipes coming out of floor. You need ANGLED or CORNER valves for pipes coming out of wall.
BTU stands for British Thermal Unit, it is energy (heat ) measurement unit. We also provide heat output of the towel rails in WATT. We recommend you to calculate your room BTU requirement and select your radiator according to your room requirement. We have designed a BTU calculator tool.
Recommended products
We think you are going to like the following products also
